Usage and precautions for No sparking pipe tongs

No sparking pipe pliers are commonly used tools in pipeline installation and maintenance work, usually used to rotate metal pipes or other cylindrical workpieces. The specification of explosion-proof pipe tongs refers to the length of the joint multiplied by the large diameter of the pipe that can be bitten.

Usage of No sparking pipe pliers:

1. Choose a suitable pipe wrench based on the diameter of the used pipe or the size of the pipe fitting;

2. Clean the front teeth of the No sparking pipe wrench, add engine oil to the teeth, install spring plates, and install adjustment nuts and teeth;

3. Clamp the pipe fittings on the pressure clamp, wrap Thread seal tape around the screw thread, screw up the bolt belt by hand, rotate the nut switch, and rotate the movable tong head to the appropriate opening;

4. Hold the movable No sparking pipe wrench head with your left hand, grasp the pipe handle with your right hand, bite the teeth of the pipe wrench onto the pipe, and after biting tightly, press down with your palm;

5. After pressing to a certain angle, lift the pipe handle and repeat the rotation;

6. After the work is completed, clean theNo sparking pipe wrench, apply butter to the pliers, close the pliers, and maintain and store it.

Precautions for explosion-proof American pipe tongs:

1. Choose a suitable specification;

2. The opening of the clamp head should be equal to the diameter of the workpiece;

3. The clamp head should clamp the workpiece tightly before forcefully pulling to prevent slipping and injury to people;

4. When using a force rod, the length should be appropriate and the force should not be too strong or exceed the allowable strength of the pipe wrench;

5. The No sparking pipe clamp teeth and adjustment rings should be kept clean.

Our factory also produces No sparking pipe tongs, including explosion-proof British pipe tongs, No sparking chain pipe tongs, and explosion-proof light pipe tongs