Specification, model and use of Torx

1、 Specification and model of Torx
The Torx is a commonly used screwdriver tool. Its head is in a torx shape and can tighten and loosen screws of various specifications and models. The specifications and models of Torx are usually expressed by the size of the Torx head. The common specifications and models are 1 #, 2 #, 3 #, etc.
2、 Introduction to the smallest Torx
The smallest Torx usually refers to the 1 # Torx, whose torx head diameter is about 2mm. The smallest Torx is suitable for removing small screws from electronic devices and small mechanical equipment.
3、 Usage of Torx
1. Select Torx of corresponding specification according to the screw head model;
2. Align the Torx bit with the screw hole, loosen the screw counterclockwise, and tighten the screw clockwise;
3. Pay attention to the force and do not use excessive force to avoid damaging the screw or screwdriver;
4. Coolant can be used to reduce heat and friction, and improve the service life of Torx;
5. After use, clean and maintain the Torx in time to extend its service life.
4、 Precautions for Torx
1. Before use, check whether the Torx matches the screw head;
2. Keep it stable and perpendicular to the thread axis during use, otherwise it is easy to damage the screw or screwdriver;
3. Do not use excessive force to avoid damaging the screw or screwdriver;
4. Clean the Torx in time after use to keep its edge clear and sharp;
5. Do not use damaged Torx to avoid safety accidents.
In a word, Torx is a very common screwdriver tool. Torx of different specifications and models are suitable for screws of different sizes and specifications. Proper use and maintenance of Torx can improve its service life and reduce safety accidents.