Usage and precautions for NON-sparking tool explosion-proof pipe pliers

Explosion proof pipe pliers are commonly used tools in pipeline installation and maintenance work, usually used to rotate metal pipes or other cylindrical workpieces. The specification of explosion-proof pipe tongs refers to the length of the joint multiplied by the large diameter of the pipe that can be bitten.

Usage of explosion-proof pipe pliers: 1. Choose a suitable pipe wrench based on the diameter of the used pipe or the size of the pipe fitting; 2. Clean the front teeth of the explosion-proof pipe wrench, add engine oil to the teeth, install spring plates, and install adjustment nuts and teeth; 3. Clamp the pipe fittings on the pressure clamp, wrap Thread seal tape around the screw thread, screw up the bolt belt by hand, rotate the nut switch, and rotate the movable tong head to the appropriate opening; 4. Hold the movable explosion-proof pipe wrench head with your left hand, grasp the pipe handle with your right hand, bite the teeth of the pipe wrench onto the pipe, and after biting tightly, press down with your palm; 5. After pressing to a certain angle, lift the pipe handle and repeat the rotation; 6. After the work is completed, clean the explosion-proof pipe wrench, apply butter to the pliers, close the pliers, and maintain and store it. Precautions for explosion-proof American pipe tongs: 1. Choose a suitable specification; 2. The opening of the clamp head should be equal to the diameter of the workpiece; 3. The clamp head should clamp the workpiece tightly before forcefully pulling to prevent slipping and injury to people; 4. When using a force rod, the length should be appropriate and the force should not be too strong or exceed the allowable strength of the pipe wrench; 5. The explosion-proof pipe clamp teeth and adjustment rings should be kept clean.

There are several models of explosion-proof pipe pliers available for you to choose from: 200mm, 250mm, 300mm, 350mm, 450mm, 600mm, 900mm, 1200mm